Ardex FG8 Grout 20KG Travertine 277 (Code:03144)

A smooth, flexible cement-based grout with improved colour integrity. ARDEX FG 8 is suitable for tile joints 1-8mm wide and is exceptionally easy to use on walls and floors.

Features:

• Strong uniform colour – reduces efflorescence
• Polymer fortified – reduces the likelihood of cracking
• Mould resistant & water repellent – improves hygiene and appearance
• Smooth finish, flush joints

For Use On: Ceramic and porcelain tiles, terrazzo, slate, quarry tiles, moisture-insensitive natural stones and mosaics. Internal and external. Wall and Floor.

Preparation: Ensure joints are clean and free from dust, excess adhesive and bedding mortar. Do not grout until the adhesive has set firmly. All ‘spacers’ must be removed from joints. Before grouting, it is advisable to check the ease of cleaning with tiles that have a textured or matt surface.

Mixing: ARDEX FG8 powder is added to clean water in a clean container whilst stirring thoroughly to give a lump-free, paste-like, creamy mortar. A 20kg bag of ARDEX FG8 requires approximately 4.2 litres of water.

Application

Work grout into the joints using a rubber trowel. Compact the grout firmly into the joints, ensuring they are filled, minimising the amount left on the tile surface. Allow the grout to firm up in the joint before clean-up. For tiles set on a thick bed of adhesive, it is preferable to ensure the adhesive has fully cured to minimise the chance of moisture affecting the colour of the grout.

Wipe the tile surface with a damp dense sponge, working diagonally across tile joints. Use a minimum amount of water to avoid water float and/or shade variation, efflorescence and shrinkage. Any dry film remaining on the tile surface can be removed when the grout has hardened in the joints by polishing the tile surface with a dry cloth, making sure no smears are left on surface.

In exterior conditions it is essential to provide protection from all extremes of climate during the whole fixing and grouting operation and for as long as possible afterwards. When using ARDEX Grout Booster, ensure all cleaning off is completed before the grout dries on the tile face otherwise difficulties during cleaning may be experienced. All tools should be cleaned with water immediately after use.

Drying Time: Approximately 24 hours at 23°C and 50% relative humidity. Allow longer for dense tiles, lower temperatures or high relative humidity.

Note:

• Do not use ARDEX FG8 for chemical resistant joints, use epoxy grouts.
• The likelihood of colour shade and efflorescence are reduced, however certain site conditions, finishing techniques and uneven drying conditions may cause this to persist. Certain types of tile may be prone to surface discoloration, e.g. some moisture sensitive natural stones or tiles with absorbent or textured surfaces. Porous face tiles e.g. terracotta, should be sealed prior to grouting to prevent staining.
• In swimming pool applications, colours may bleach over time.
• For expansion or movement joints, use silicone sealant. Due to the varying degrees of movement inherent in timber floors, it is recommended that ARDEX FG8 be mixed with diluted ARDEX Grout Booster.
• Before any substrate preparation, installation or finishing methods relating to ARDEX product are undertaken, please be aware of any potential risks and use appropriate PPE (personal protective equipment). This may involve contacting substrate manufacturers for Safety Data Sheets.

Precautions

This product may cause irritation and an allergic reaction to the skin. It may cause serious eye injury and irritation to the respiratory system. In case of contact with the eyes rinse with running water until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Wear protective gloves, clothing, eye and face protection. Avoid inhaling dust/ fumes/gas/mist/vapours/spray. Ensure adequate ventilation during mixing and application. Suspected of causing genetic defects. Store locked up. Check with your local Council regarding the disposal of contents, dispose of packaging thoughtfully and recycle where possible. Keep out of the reach of children.